How to Repair Blower Motor Issue
Time Required: 20 minutes
Tools Required: Phillips screwdriver
Cost to Repair: $45.00
Description of Problem
Last week the blower for the A/C and heater stopped working on my 2003 Acura TL Type-S. The climate control unit will turn on, but you cannot feel the air because the blower will not blow. I tried turning it on Full Auto in both the hot and cold settings, nothing. I turned the fan knob to max and still nothing. When you turn the climate control unit on, you can hear the compressor under the hood turn on. The problem is clearly the blower not turning on.
The Repair
After some online research, I learned that much like the seat heater problem, this too is a common issue for the Acura TL (as well as other Honda and Acura models). A friend had this same issue with his Acura TSX. The solution: Replace the blower resistor.
Disclaimer / Precautions
I am not a mechanic. Follow my advice at your own risk. This repair is easy and cheap- so don’t be scared. Be sure to disconnect the battery, wear safety glasses, put on gloves, tie your shoes, chew with your mouth closed, and any other safety stuff that makes you not sue me.
Let’s begin!
Most of the time, the problem is that the blower resistor needs to be replaced. But first check to make sure the issue is not something else like a blown fuse or corroded connector. The blower fuse is located under the hood (it is close to the firewall on the passenger side for my model). The fuse is labeled “Heater Motor” on the fuse cover.
If the fuse looks good, move on to the blower inside the car. The blower motor is located below the glove box. Notice the giant yellow arrow pointing to the location.
Here you can see the blower motor and the blower motor resistor.
Disconnect the wiring connector from the blower motor to make sure there isn’t any corrosion or connection issues. Sometimes corroded connectors [photo] will cause the failure. These are clean, this is not the problem… On to the blower resistor.
Follow the wiring harness from the blower motor to the blower motor resistor. It is a white plastic trapezoidal-ish piece that is fastened by two Phillips head screws. Remove the two screws that fasten the blower resistor in place. This will allow you to pull the blower resistor down and disconnect the wires.
Gently pull the blower resistor down and disconnect the wiring connector. Here is a close up of the resistor after it has been removed. These connectors look clean too.
The metal side of the blower resistor had some crud on it. I don’t know if this was any indication of it being broken or not.
Replace the blower resistor with a new one. This part can be purchased at most auto parts stores. I paid $41.99 plus tax at AutoZone. To reinstall the part, simply screw the resistor back into place with the two screws. Reconnect all the wiring and test by turning on the climate control fan.
It should work perfectly now. If you continue to have issues, you might need to visit your mechanic.
Did this repair worked for you? Please leave a comment below and include the year, make and model of your car OR share this fix with other Acura/Honda Owners:
If you find any of the JoshsWorld.com content to be helpful, entertaining, or life-changing, feel free to make a financial contribution on my Patreon account. Any contributions help me afford the time to create more articles, videos and other content.
Thanks for the site, still helpful after nearly 8 years! I got the part for my 2003 Acura TL from an ebay site for under 18 bucks. Popped it in and the blower is working again! Also interesting, as I prefer free to cheap, I cleaned up my resistor and tried it before purchasing, and it didn’t look all that bad even before I cleaned it, but it still didn’t work. So not sure what it is in these things that goes bad.
Thanks Josh… That actually was the problem . you saved me from having to go to the shop !!! Your a life saver !!!
That worked perfectly, thanks! The symptom in my 20-year old Acura TL was a fan speed that was stuck, and the blower kept blowing at constant speed even when turning the unit off. The new resistor fixed it like new.
Josh… DUDE! You hooked me up big time. I swapped the 40 amp blower fuse with the electric seats fuse and proved it was not the blower “fuse”. $20 on Amazon and 5 mins to install and my ole 313K TL avoided the chopping block once again. Joking aside, you did an AWESOME job putting this web page together. It’s easy to understand and I’m someone who LOVES to understand through pictures. You REALLY helped me; Thank You!!
Thank you so very much for your video it really saved me because I had no idea about the resistor which solved my problem I would’ve spent the money on a new blower motor and still been puzzled why it didn’t work and would have been out the money on a new blower motor that I didn’t need being you can return electrical parts. So thanks again I really appreciate you buddy!!!!
Nice video I’ve followed all the steps, but still do not have air blowing….I’ve checked the 40amp fuse under hood, inspected the wiring at the resistor and motor and all is ok, I replaced the blower resistor and still no air. I guess my next step is to replace the motor, hoping that will do it